Attack on Titan DTF Transfer Sheet | A5

For the scouts who never gave up on humanity — this Attack on Titan DTF transfer sheet is a must. DTF (Direct to Film) printing delivers vibrant, full colour results with a white ink base layer so the design looks incredible on both light and dark fabrics. No weeding required — just press and go. Perfect for customising t-shirts, hoodies, tote bags, jackets and more.

How to Apply Your Transfer

Using a Heat Press:

1. Preheat your press to 160°C (320°F)
2. Place the DTF sheet onto the garment, cover with parchment paper and press firmly for 10 seconds
3. Allow the design to cool, then gently remove the film
4. Cover the design with parchment paper and press for an additional 10 seconds to fully cure

Using a Household Iron:

1. Set your iron to the highest heat setting with steam turned off
2. Place the DTF sheet onto the garment and cover with parchment paper
3. Press the iron down firmly — do not slide it — and hold for 15–20 seconds, moving section by section across the design
4. Allow to cool, then gently peel the film
5. Cover with parchment paper and press again for another 15–20 seconds to fully cure

For best results a heat press is recommended. Iron application may vary depending on your iron’s heat output.

For best results, press onto a smooth, clean, pre-heated fabric surface. Always use parchment paper throughout.

What Works With DTF Transfers

Compatible with cotton, polyester, cotton/poly blends, denim, canvas, nylon, fleece, and more. Works on both light and dark fabrics.

Sheet Details

• Sheet size: A5 (approx. 148 × 210 mm)
• Design: Attack on Titan
• Finish: Matte film
• No weeding required
• Application temp: 160°C / 320°F
• Press time: 10 seconds + 10 seconds cure

Please Note

Sheet size is A5 (148 × 210 mm). Design size will vary and will not automatically fill the full sheet. This listing is for the DTF transfer sheet only — not a finished garment. Garment, fabric item, and heat application equipment are not included. We are not responsible for application errors. Always do a test press on a scrap piece of fabric first if you are new to DTF transfers.